- bballinParticipantJune 21, 2015 at 3:27 amPost count: 2
I have just opened a quart can of EkoPoxy Charcoal Grey Primer Part A that I recently received, and found that the contents have a very thick sludge like consistency which is difficult to stir. I haven’t used this product before and am wondering if this is the normal consistency for this product?
Thanks for your help.David GrovesParticipantJuly 30, 2019 at 4:33 pmPost count: 1
I could not see a response to this post but I have just received my primer and it’s the same. When I mix it with the part B it’s lumpy and after adding the water it’s still too thick or run through the filter into the gun.
What am I doing wrong?
You must be logged in to reply to this topic.