Home › Forums › Paint Application › Primers › fabric patch

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • idahopaceridahopacer
    Participant
    August 19, 2013 at 11:58 pm
    Post count: 10
    #6585

    Thought I had the fuselage ready for Eko-poly then I noticed that I did not have the openings for the rudder cables cut out, my question is can I put the cable fairing and a fabric patch over all the eko-fill and eko-prime or should I remove as much as I can in the area of the patch. If removal is necessary what is the best way, sanding, MEK or ? Glad I caught thus before the color coat!

    idahopaceridahopacer
    Participant
    January 22, 2019 at 3:01 pm
    Post count: 10
    #11214

    thanks Jason
    Bob

    jason gerardjason gerard
    Moderator
    January 22, 2019 at 3:01 pm
    Post count: 209
    #11213

    I personaly don’t add a fabric patch over that area. I paint the airplane, cut the notch for the cable, then glue the letherette tear-drop shaped patch over the top

    If you want to add a fabric patch then just glue it on now and keep on going. No need to get down to bare fabric.

    Jason

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.