Home Forums Technical Support Wood Finishing finish drying problems over minwax stain?

Tagged: 

Viewing 2 posts - 1 through 1 (of 1 total)
  • Author
    Posts
  • davefollmersdavefollmers
    Participant
    Post count: 11

    HI,

    I have just sanded a 1940’s red oak floor, 40, 60, 100. edged 60 100 and screened with 120, water popped, Then applied red mahogany minwax with rags. Waited 2 days, seemed to be dry. applied 1 coat of poloplaz and has been 30 hrs and still tacky? I turned heat on after about 24 hrs and have fans running. Anything else i can do to speed this along? I have never had this happen before. I can normally buff and 2nd coat after about 12-16 hrs at the most..

    please help

    I did not find the right solution from the internet.

    References:
    https://www.woodfloorbusiness.com/floormasters/viewtopic.php?f=1&t=9294
    [url=https://jobs.vidzzy.com/hire-creative-video-production-service/]Creative video production service
    [/url]

    Thanks!

    davefollmersdavefollmers
    Participant
    Post count: 11

    HI,

    I have just sanded a 1940’s red oak floor, 40, 60, 100. edged 60 100 and screened with 120, water popped, Then applied red mahogany minwax with rags. Waited 2 days, seemed to be dry. applied 1 coat of poloplaz and has been 30 hrs and still tacky? I turned heat on after about 24 hrs and have fans running. Anything else i can do to speed this along? I have never had this happen before. I can normally buff and 2nd coat after about 12-16 hrs at the most….

    Please help.

    I didn’t find the right solution from the Internet.

    References:
    https://www.woodfloorbusiness.com/floormasters/viewtopic.php?f=1&t=9294
    [url=https://jobs.vidzzy.com/hire-product-video-production-company/]Product video production[/url]

    Thanks!

Viewing 2 posts - 1 through 1 (of 1 total)
  • You must be logged in to reply to this topic.