Home Forums Paint Application Primers PPG Shopline Epoxy primer /EPP compatibility

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • alpinestaralpinestar
    Participant
    Post count: 14

    Hi Jason. I had some of this primer laying about & shot some metal parts with it, then topcoated with EPP and after about 5 hours of cure, it’s looking like it’s not getting along well; you have to be really close to see but it appears that it’s forming some outgassing bubbles. I let the epoxy cure for roughly 3 days; after 3 days PPG requires the epoxy to be re-applied for cohesion with their product. With the Stewart stuff, we’re dealing with adhesion if I understand correctly; so I scuffed & shot.

    Is there any logic to the paints not getting along, or should I have let the PPG epoxy cure a whole lot longer? Should have stuck to the good ol ekopoxy! Not a huge disaster, easy stuff to strip, but just curious.
    thanks

    jason gerardjason gerard
    Moderator
    Post count: 209

    I am not sure what you’re seeing. I would have to see the part in person to get a better idea. There should not be any reaction with other coatings since there are no VOC’s in the EPP paint.

    Jason

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.