- alvinsagerParticipantDecember 28, 2014 at 7:15 pmPost count: 26
I am just about finished with my painting. Everything looks great, except for one very visible area where I have a run. I was wondering whether I can use a surfacing tape (pinked) as the edge of the area I re-coat. If not, I will have to do the entire fuselage side.
Aljason gerardModeratorJanuary 6, 2015 at 4:51 amPost count: 209
You can mask just the section using a pinked edge on the masking tape to match the pinks of the finishing tape or you can curl back the edge of regular masking tape so there is no “hard line” when you spray. I suggest practicing before going after the real deal.
- You must be logged in to reply to this topic.