- Ebby1600ParticipantDecember 20, 2014 at 1:18 pmPost count: 1
I’ve heard good things about this gun for HVLP. Do you have any experience using this gun with Stewart Systems paint? If so, what tip size would be best and how much PSI/CFM at the gun? What viscosity for primer and paint? Im planning on piggybacking compressors as I’ve also heard these guns require lots of air. I’m pretty much set on this gun and will use Dekupps system.
I have watched several of your painting videos which are very helpful and want my Hatz Classic to look great. Any additional tech info would be appreciated. By the way I have some experience painting with a gun just not waterborne experience.
Hatz Classic s/n 37jason gerardModeratorJanuary 6, 2015 at 4:57 amPost count: 209
Each spray gun works slightly different so it’s best to practice till you find the setting that work best with your air system set up. Good solid constant air supply to the gun is very important. Try charging the air hose to the gun at 70psi and adjust the gun per the manufactures settings for recommend air pressure based on your set up or which air cap you choose to use.
- You must be logged in to reply to this topic.