Home Forums Technical Support Fabric Finishing Tip Size Spraying Ekofill

Tagged: 

Viewing 1 post (of 1 total)
  • Author
    Posts
  • KamcomanKamcoman
    Participant
    Post count: 1

    I saw an older video by Dan Stewart stating a 1.5 mm tip was used on his DeVilbiss Finishline gun for Ekofill. I saw a recent post by Jason Gerard stating all products are sprayed with a 1.3 mm tip. I’m a little confused unless the video is too old to be current information. I have a DeVilbiss Plus (hvlp-compliant) with 1.2, 1.3, and 1.4 mm tips. Would I be better off using the 1.3 mm, the 1.4 mm, or get a 1.5 mm for Ekofill?

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.